CR-N500
- 1.0-inch 4K CMOS sensor with DIGIC DV 6 processor
- 15X optical zoom with 9-blade iris and optical-shift IS
- Dual Pixel CMOS AF with on-camera Auto Tracking
- 3G-SDI, HDMI 4K30P, IP and NDI|HX2 output

Specifications
FAQs
What productions is the Canon CR-N500 best suited for?
The Canon CR-N500 is an indoor 4K PTZ camera built for live production, houses of worship, lecture capture, corporate events and streaming studios. Its 1.0-inch CMOS sensor and DIGIC DV 6 processor deliver detailed 4K UHD imagery with Canon colour, while Canon Log 3 and Wide DR gamma make it easy to match with other cameras in a multi-camera setup.
Does the Canon CR-N500 support auto tracking?
Yes. Since firmware 1.5.0 the CR-N500 includes Canon’s Auto Tracking Lite application, which runs on the camera itself and automatically pans, tilts and zooms to follow a presenter without an external PC. The paid Auto Tracking Application RA-AT001 licence adds advanced settings such as exclusion areas, priority display, tracking sensitivity and initial position, and firmware 1.8.0 lets tracking start or stop automatically when a preset is recalled.
What video outputs and streaming protocols does the CR-N500 support?
The CR-N500 outputs 4K UHD up to 29.97P over HDMI, Full HD up to 59.94P over 3G-SDI, and IP video up to 4K30 or FHD60 with up to three simultaneous streams. For IP workflows it supports NDI|HX2, SRT, RTMP/RTMPS, RTSP/RTP, FreeD and Canon’s XC Protocol. Note that 3G-SDI carries Full HD only, so SDI output is inactive when HDMI is set to 4K.
How powerful is the zoom and autofocus on the CR-N500?
The CR-N500 features a 15X optical zoom with a 35mm-equivalent range of 25.5mm to 382.5mm, plus 20X digital zoom and optical-shift image stabilisation. Canon’s Dual Pixel CMOS AF provides fast, accurate focusing with Face AF and Tracking modes, and a built-in motorised ND filter (1/4, 1/16, 1/64) keeps exposure under control in bright venues.
How is the Canon CR-N500 powered and controlled?
The CR-N500 runs on PoE+ (IEEE 802.3at) over a single LAN cable or on 24V DC via the included AC adaptor, drawing approx. 19.6W maximum. It can be controlled via LAN, Wi-Fi, RS-422 serial or the included WL-N01 IR remote, and works with Canon’s RC-IP100 and RC-IP1000 controllers as well as the free Remote Camera Control Application.
