Opens in a new tab
Get In touch
Audio Solutions

Ceiling Mic Solutions

Ceiling microphone array design and installation with beamforming technology, DSP integration, Dante networking, and room coverage optimization for clean, professional conferencing audio.

Invisible Audio, Invisible Infrastructure

The worst thing about a great microphone is that people can see it. It gets bumped. It gets covered by laptops. It gets borrowed and never returned. Ceiling microphone solutions solve all of that by moving the entire audio pickup apparatus above the conversation – completely out of sight, completely out of mind, and completely in control. In 2026, the trend in corporate AV is overwhelmingly toward ceiling-mounted microphone arrays for full-room coverage without a single cable on the table.

How Beamforming Ceiling Arrays Work

A ceiling mic array is not one microphone; it is a grid of dozens or hundreds of tiny MEMS microphone capsules working in concert. Using beamforming algorithms, the array creates virtual “pickup lobes” – invisible cones of sensitivity that can be steered, widened, narrowed, or moved on the fly.

The Shure MXA920, for example, uses over 100 MEMS elements to create up to eight discrete audio beams. You define coverage areas on a floor plan using Shure’s software, and the mic intuitively tracks talkers within those zones without aiming physical lobes. If someone stands up and walks to the whiteboard, the beam follows them. If a side conversation starts at the coffee station outside the defined zone, it is ignored entirely.

The Leading Ceiling Microphone Platforms

We spec the right array for your ceiling type, room size, and acoustic environment:

  • Shure Microflex Advance MXA920 / MXA925: The industry default for boardrooms and lecture halls. Available in square or round form factors. Features Automatic Coverage technology, onboard IntelliMix DSP, and seamless Dante integration.
  • Sennheiser TeamConnect Ceiling 2 (TCC2): Uses a patented automatic dynamic beamforming algorithm that requires zero configuration – just mount it and it learns the room. Exceptional for highly reverberant spaces.
  • Audio-Technica ATND1061: A sleek linear array for modern open ceilings, with zone-controlled beam steering and PoE+ power.
  • Bose DesignMax / Biamp Parle: Integrated mic-and-speaker bars for small huddle spaces where a single device must do everything.

Aesthetic Form Factors for Every Ceiling

Ceiling mics are not one-size-fits-all. We offer:

  • Drop Ceiling Tile Replacements: Units like the Shure MXA910 that look exactly like a standard 2×2 or 2×4 ceiling tile and sit perfectly flush.
  • Pendant Mics: Suspended cylindrical arrays for exposed, industrial-style ceilings where there is no grid to blend into.
  • Surface-Mount Arrays: Low-profile bars or discs for drywall or concrete ceilings that cannot accept recessed mounting.
  • Concealed Mics: Ultra-compact capsules hidden inside light fixtures, air vents, or architectural elements for spaces where even a visible grille is unacceptable.

DSP Pairing: The Array is Only Half the Equation

A ceiling mic without a DSP is like a Ferrari without a steering wheel. We pair every array with a professional-grade digital signal processor that handles:

  • Acoustic Echo Cancellation (AEC): Essential because ceiling mics are far from the talker and inevitably pick up loudspeaker bleed.
  • Automatic Gain Control (AGC): Compensating for the distance disadvantage by normalizing every voice to the same level.
  • Intelligent Noise Reduction: The array hears everything – paper shuffling, HVAC, typing. The DSP filters out what is not human voice.
  • Automatic Mixing: When multiple people speak simultaneously, the DSP creates separate, clean audio streams for each active talker.

Integration with Conferencing, Streaming, and Recording

Ceiling mic output feeds directly into your Microsoft Teams Room, Zoom Room, lecture capture appliance, or live streaming encoder via Dante, USB, or analog connections. Because the mic is always in the same place, always configured, and never moved, your audio quality is consistent from meeting to meeting – no more “someone moved the mic and now it sounds terrible” support tickets.

Commissioning and Zone Calibration

Every ceiling mic requires proper commissioning. We spend time on-site using the manufacturer’s software to:

  • Define coverage zones that match your seating layout.
  • Create exclusion zones to ignore doors, hallways, and noisy HVAC vents.
  • Calibrate sensitivity and gate thresholds so the mic activates on speech but ignores coughing and chair scraping.
  • Run STI (Speech Transmission Index) tests to verify that the final audio quality meets or exceeds conferencing platform certification standards.

The result is a ceiling that listens intelligently, speaks clearly, and never gets in the way.

Ceiling microphone array installation, beamforming zone configuration and optimization, DSP integration and programming, Dante network audio routing, room coverage mapping and verification, acoustic echo cancellation tuning, ceiling mounting and cable routing, audio quality measurement and verification, conferencing platform integration, user training and documentation

FAQs

×

Request a Quote

Tell us what you need and our team will get back to you with a quote.